Panchal Pipeline Equipment

• Cage Clamps are the cost effective method to quickly align a single size of pipe.
• There are three versions available; manual, ratchet and hydraulic.
• These are available in two styles, either “Tack” or “No Tack”.
• The tack type has straight cross bars and is removed from the pipe before final welding.
• The more popular no tack model has arched cross bars to permit a 90% circumferential weld without removing the clamp.

10 Inch Internal Manual Clamp is a mechanical tool used to align and hold pipes in place from the inside, typically during welding, fitting, or other types of pipe work. This tool is used in industries like construction, plumbing, HVAC, and oil and gas to ensure that pipe sections are aligned properly before they are welded or joined together. Unlike pneumatic or hydraulic clamps, an internal manual pipe clamp requires manual effort to tighten and adjust, making it simple but effective for smaller to medium-scale operations.

10 Inch Internal Manual Clamp is a mechanical tool used to align and hold pipes in place from the inside, typically during welding, fitting, or other types of pipe work. This tool is used in industries like construction, plumbing, HVAC, and oil and gas to ensure that pipe sections are aligned properly before they are welded or joined together. Unlike pneumatic or hydraulic clamps, an internal manual pipe clamp requires manual effort to tighten and adjust, making it simple but effective for smaller to medium-scale operations.

 Designed for all diameters. Works with a defined pipe thickness, not a range of thickness.

·          Works on specified pipe thickness.

·          Quick Line-up for continuous welding of pipe.

·          Screw jack type mechanism for adequate alignment.

·          Toggle action puts maximum power on pipe.

·          “Gap” is unobstructed for full stringer bead.

·          Heavy duty jack box for more power on the pipe with less operator effort.

·         Quick reliable alternative to Internal line-up range.